Dew Point Sensor
Dew Point Sensor Energy Saving Product And Accessories Johor Bahru (JB), Malaysia, Mount Austin Supplier, Suppliers, Supply, Supplies | JCompressor Services Sdn Bhd
CS-iTEC dew point sensor / dew point transmitter S 212

Drifts caused by temperature changes, dust and aging are eliminated by the electronics providing reliable measurements. Recalibration interval thus could be increased to 2 years.

The measured dew point is output via a 4-20 mA signal output. The compact size of the sensors make them an ideal choice for installations in tight environments. Sensor parameters such as analogue output scaling, alarm values, units etc, can be easily changed by using CS-iTEC service kit.
This kit is used to connect the sensor to a PC for configuration changes.

The CS-iTEC dew point sensor S 212 provide reliable and long term stable dew point monitoring in industrial applications. The newly developed sensor features improved signal and stability in demanding industrial applications. It makes it an ideal choice for dew point measurements in desiccant dryers.


Dew point measurement is used in:

Compressed air dryers and before sensitive equipment

  • Plastic injection process resin drying
  • Blow molding process
  • Medical gases in hospitals
  • Compressed air purity in food and pharmaceutical industry
  • In all industrial processes requiring high purity of clean and dry air (CDA)

S 212_2
Connection of S 212 with measuring chamber to compressed air


Product features

  • Dew point sensor for low dew point applications down to -50 ºC
  • Long term stability
  • IP65 casing provides robust protection in rough environment
  • Very fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
  • Can be installed directly into dryers through G 1/2″ thread
  • High accuracy of ±2 ºC dew poin

Technical data

Measuring range
Dew point
Relative humidity
-50 …+20 ºC
0 …99.9%
-30 …+70 ºC
Accuracy ±2 ºC dew point @ -50 ºC
Pressure range -0.1 … 5.0 MPa
Power supply 12 … 30 VDC / 60 mA
Ambient conditions -20 … 50 ºC
Response time t90 0…-40 ºC: 2 minutes
-40…0 ºC: 20 sec
Output signal 4…20 mA, 3-wire
Connection M12, 5 pole
Casing Zinc alloy
Classification IP65
Process connection G 1/2″ thread (ISO 228/1)
UNF 5/8″ thread (on request)
Transport temperature -10 … +60 ºC

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version